You do not have any products in your basket.
Showing all 2 results
Installing Driveway Gates.
When you install Driveway Gates you will need to measure the total width including gate posts and leave yourself a 10mm gap either side of posts and in between gates. Which would be a total of 30mm. Every pair of gates are supplied with a centre closing strip to cover the centre gap. When measuring for the height for your gates, please allow 50mm (2″) from the ground level to the height you need at the hanging side. Please make sure to allow clearance for any high spots in the ground as opening and closing them over these high spots would damage the gates. This is necessary so your hinge will operate correctly and allow for natural movement of the timber.
If you have an in between size, use the next size up for accurate pricing and then you can add your correct size required into the message box once in the checkout.
See below for Driveway Gates.
By PDF Download
Please fill in the form below and we will immediately send you one of our full colour brochure packs.
Please fill in the from below to download the brochure in PDF format.